Can you test it with the steps below?


1) Turn off the light

2) loosen the head of the light for 3/4 turn

3) Tighten the head while holding down the paddle switch


You shall notice that everytime you repeat step 1-3, the light will blink once, twice, or three times.

Test the light after each round and you will see the light can be programmed to three groups of different functions.


You can also watch a short video about this configuration (start at around 1:30) (ONLY INCLUDE THIS if external link is allowed)

https://www.youtube.com/watch?time_continue=1&v=r-P_ga3rWdg 


Let us know if this resolves the issue you described.