Feature

  • 10,000mAh Ultra compact power bank
  • Compatible with QC/PD fast charging
  • 50-lumen emergency flashlight that lasts up to 30 hrs
  • High altitude, temperature resistant
  • Quad-LED battery level indicator


In/Output

  • NC10000 only has one USB-C port for both input and output. 
  • Input (to charge the power bank): the NC10000 can be connected to a USB-C to USB-A cable for standard charging (up to 5V/2A), or a USB-C to USB-C cable for PD fast charging (9V/2A)
  • Output (to charge other electronics with the power bank): the NC10000 can be connected to a USB-C to USB-C cable to enable QC2.0/3.0 or PD 2.0/3.0 charging.


Accessory Options

The manufacturer package does not include any charging cable. Our Nitecore store website offers these accessories.

So, what accessories does one need to use the NC10000?

  • Option 1: a USB-C to USB-C cable for both input and output; a PD adapter for input
  • Option 2: a USB-A to USB-C cable and a USB-A adapter or QC adapter for input; A USB-C to USB-C cable for output

Most people who buy NC10000 should already have a PD adapter and a USB-C to C cable.



Comparison between NC10000 and NB10000

  • Dimension: NC10000 (3.5“ x 1.78" x 0.89") vs NB10000 (4.8" x2.32" x 0.42"). NC10000 is smaller but thicker.
  • Weight: NC10000 (5.94oz) vs NB10000 (5.29oz). NB10000 is 12% lighter, although both are very lightweight already.
  • Rated Energy density: NC10000 (6K) vs NB10000 (6.4K). NB10000 has 6.6% more capacity.
  • Input/Output: NB10000 is more flexible since it is compatible with both USB-C and USB-A output
  • Extra feature: NC10000 has a built-in 50-lumen LED light that runs up to 30 hrs. NB10000 has a low current mode which is essential when charging small-capacity devices such as NU25 and watches.
  • Price: NC10000 ($54.95) vs NB10000 ($59.95)


How to operate the NC10000? 

The NC10000 is automatically activated when connecting to (charge from) a power source or (charge) another device.

When the power bank is on, tapping the switch once can turn off the charging (to other devices)


How to turn on/off the LED in the NC10000

  • Press and hold down the switch for 3 seconds to turn on the LED when the light is off.
  • Press and hold down the switch for 3 seconds again to turn off the LED when the light is on, 

Or

  • Double tap the switch to shut down the power bank and the light when the light is on
  • Tap the switch again to turn on the LED again.

Note: It could be confusing when the two operations above are mixed. If one double click the switch to turn off the light, a long press won't turn on the light. If that happens, try both single tap and long press again to activate the light. This is a design decision rather than a defect.