Lumen Tactical LLC

For Orion H40W-S tactical light with offset mount or rail mount, please look for two small pieces of black rubber inserts(spacers) inside the mount box. Mos...

  To change the output modes, turn on the light first. Loosen the head of the light for 1/4 turn then tighten it again within one second. The light will c...

H40W/H20 usually only has two issues. 1) A defective pressure switch (most common) This can be identified by asking the buyer to test the light with bo...

The strobe function can be disabled or enabled on Orion H30 by following the steps below. To enable the strobe: 1) Tightening the head and turn ...

To Switch between Tactical (High-Medium-Strobe) mode and Regular (High-Medium-Low) mode, please follow the steps below. 1. Turn on the light. Rotate...